Skul Plumbing

How to caulk a tub like a Pro!

How to caulk a tub like a pro!

Time to complete: 45 min.

Recommended tools needed for this job:

  • Wallpaper scraper with 4″ scraper blades
  • Scotch Brite cleaning pads
  • Comet cleanser with bleach
  • Caulking gun
  • 1 tube G.E. bathroom silicone caulking (white or clear for dark color tubs)
  1. If existing caulking line has harden, it maybe necessary to heat it up with a hair dryer until it becomes soft enough to scrape with blades.
  2. Remove all existing caulking or grout from tub line at three walls.
  3. Wash area with cleanser that contains bleach. (It will get rid of mildew)
  4. Make sure you remove all traces of old grout, caulking, mildew and soap.
  5. Allow area to dry.
  6. Apply masking tape to tile wall 1/4 inch higher above tub or shower. and to bathtub in the same manner as above. Do all three walls.
  7. Use a quality caulk like G. E. White Silicone Caulking for white tub, do not use clear.
  8. Load the tube in a caulking gun, cut tip diagonally and pierce seal.
  9. Start from either side, left or right. When you begin squeezing gun trigger, begin moving gun at the same time, always pull the gun opposite the direction which gun is pointing, keeping pressure on the trigger, against tub and wall, do not lift gun off caulk line until you reach a corner. At that point release trigger and pressure from the gun, using paper towels, clean off gun tip.
  10. Begin the center line (long wall) again pulling gun and squeezing trigger constantly without lifting gun, pull gun to next corner of tub, release trigger and pressure, lift gun and clean off tip.
  11. Complete the last line the same way, keeping gun tip clean at all times. At that point using your wet index finger smooth silicone line by sliding your wet finger and removing excess at the same time, run the finger to first corner, stop, clean finger with paper towel the start the next line, follow this step until you finish all three walls.
  12. Finally allow 10 min. or so to allow caulking to set.
  13. Proceed to remove all tapes slowly and carefully discard into waste container.

Congratulations!, you are now a caulking pro

There you have it, any questions or comments? send them in. We’d love to hear from you.

Brought to you by the Bathtub Doctor Team.

June 29, 2009 - 7:15 AM No Comments

Perfect Pool Supplies for your Hot Tub

Are you looking for high quality swimming pool, hot tub and spa supplies at the most cost-effective rates? If yes, then why not log on to the Net and look for those equipment and accessories which will take care of all aspects of pool maintenance and care.

What you will find
On the World Wide Web, you will find a large number of retailers who are ready to offer a steady and cost-effective range of supplies for your pool, spas and hot tubs. They will offer you the best and outstanding swimming pool equipment and products at an exceptional price from a large inventory supplies so you can find exactly what you are looking for.

Whether it is pool chemicals or cleaners, covers or deck furniture, the entire selection of inventory includes everything from top to bottom. What’s more one can also find pumps, robotic cleaners, pool paint, filters, heaters and accessories from the entire selection at the best quality. All such products come along with an outstanding customer service, hassle-free shipping, delivery and a guarantee.

Hassle Free Shopping
Every dealer is committed towards ensuring your shopping experience will meet and surpass all expectations you ever had. A round-the-clock ordering service also allows one to place their order online anytime and anywhere where it is highly convenient. Better still, an efficient and friendly service will enable you to make your transactions quickly and smoothly so you can start enjoying your pool supplies faster and conveniently.

Well, then what is the wait for, just go ahead and enjoy the best inventory of pool, hot tub and spa supplies at best available values possible. With a large range of stores out there, we are sure you will be able to find your own ‘numero uno’ source for great products at comfortable prices and service.

At Okanagan Arctic, we are a premier online store featuring the highest quality pool, hot tubs and spa supplies. Believing in the philosophy of customer is king; we offer a great selection of pool service and pool supplies at the most unbeatable prices anywhere. Thereby, giving our customers a range of pool, hot tubs and spa supply which will give them an ideal time for relaxation and unwinding.

Article Source:http://www.articlesbase.com/bath-showers-articles/perfect-pool-supplies-for-your-hot-tub-978815.html

June 28, 2009 - 1:06 PM No Comments

How to fix a bathtub

A bathtub in the wash rooms may be circular, rectangular, square or quarter round in shape. The type depends on the design of the bathroom. Most of this are located adjacent to two walls in the room. The design of the bathroom has the other sanitary ware like the wash basins, water closets and shower enclosures. For most areas only a shower could be in the room, after redesign a tub is fixed. The type depends on space and resources available.

When fixing or replacing a bathtub, ensure it conforms to the plumbing installed. For a new tub create the space and allow all plumbing points are installed including the waste pipes. Start fixing the tub by positioning it in place and mark out. Create a decking for supporting below by building a course of walling and filling with sand. After this place the tub into position. Cut the holes for the mixer which has a hot, cold, and telephone shower.

Once the bathtub is in place and sitting on the decking, start by connecting to the waste pipe. This is located at  the tub bottom. Join the flexible pipe provided to tub waste point with necessary jointing materials. Take the mixer and tie to the tub. Loop the hot and cold points from the wall to the tub mixer. place cement and mortar and surround the tubs steel supports on the floor. Run the water from hot, cold and telephone shower for ten minutes.

After fixing the bathtub basin, align the side cover into place.Lay the chosen ceramic wall and floor tiles around the tub. For a straight or regular bath, wall tiles are done on the exposed sides unto the brim. The service hatch tile cover is done with grouting only. Once tiling and grouting is complete, on the edge of tub joining the wall, a sealant is applied. This reduces chances of seepage between the wall and the basin edging.

Andrew Karundu Is A Building Economist, Providing Home Based Solutions To Fixing, Repairing, Remodeling And Redesigning Homes. He Uses Simple Tried And Tested Methods To Improve Family Lifestyles.Visit His Site Here For Adequate Information On Most HOME IMPROVEMENT SOLUTIONS.

Article Source:http://www.articlesbase.com/bath-showers-articles/how-to-fix-a-bathtub-980203.html

June 27, 2009 - 12:24 PM No Comments

« Older Entries